|
|
|
|
|
|
After mold production is completed, molds are attached
to an injection molding machine for production. Our
injection molding machine is equipped with an automatic
robot-hand type ejection system to provide high working
speed, high efficiency and high precision. An advanced
cooling system is designed to maintain mold temperature
uniformly at all times in order to prevent distortion or
ejection error, so that uniform quality is maintained
throughout production.
Our injection molding expert also performs a close check
every production time to ensure uniform quality
throughout production. Products manufactured through
our strict quality control are safely packaged for delivery.
Being aware that high quality is the competitive advantage
of our company and country, we are promoting quality
improvement in every process. |
|
|
| Clamping force |
ton |
850 |
1,800 |
| Mold opening force |
ton |
63.5 |
140 |
| Distance between tierods(H×V) |
mm |
1,100×1,100 |
1,600×1,600 |
| Die plate dimension (H×V) |
mm |
1,580×1,580 |
2,150×2,150 |
| Clamping stroke |
mm |
1,750 |
2,400/1,700 |
| Daylight |
mm |
2,250 |
2,500~3,200 |
| Minimum mold thickness |
mm |
500 |
800~1,500 |
| Mold close speed |
High |
m/min |
41(34.1) |
42.7(35.5) |
| Low |
m/min |
2.4(2.0) |
2.0 |
| Mold open speed |
High |
m/min |
34.7(28.8) |
44.4(37.0) |
| Low |
m/min |
1.1(0.9) |
2.0 |
| Ejector force |
ton |
24.7 |
44 |
| Ejector stroke |
mm |
250 |
300 |
| Clamping force |
ton |
850 |
1,800 |
|
 |
Abundant achievement in
high quality production moulds
|
| |
 BUMPER
Instrument
panel
Door
trim
Pillar
trim
Head
lamp, Rear combination
Lamp
HVAC
case |
Various facilities enable the
production of small to large size
moulds
|
|
|
|
|
